Category Archives: Mobile Terminal

Job Checklists

Posted on 30 January 2014 by admin

Had a interesting discussion with one of the Indevin Senior Managers around how they were going to use the mobile terminal system, the discussion was interesting an up-played its  importance significantly in their industry and how they ultimately see it … Continue reading →

Posted in Mobile Terminal | Comments Off on Job Checklists

Hack-a-Day and Github

Posted on 7 January 2014 by admin

Thanks to Hack-a-day for approving my suggestion to put on the fill level sensor write-up and thanks to all the comments on the site and via email I hope the files prove useful to at least one person As a … Continue reading →

Posted in Fill-Level Sensor, Mobile Terminal | Comments Off on Hack-a-Day and Github

Mobile Terminal Power On/Off

Posted on 5 January 2014 by admin

Had a good long think about how the cellar hands currently need the system to work so I can better customise the system for them, there seem to be a few basic actions required and these are really quite simple … Continue reading →

Posted in Mobile Terminal | Tagged , , | Comments Off on Mobile Terminal Power On/Off

HK Here I come

Posted on 4 January 2014 by admin

Got a stop over for 2 days (weekend unfortunately) in Hong Kong, its been over 20 years since I lived there and I cant wait to see how much everything has changed. I was hoping to use the time to … Continue reading →

Posted in Mobile Terminal | Comments Off on HK Here I come

Version 5 Power Up!

Posted on 18 December 2013 by admin

After a really long wait to assemble the PCB (See Time is not your friend) I managed to get a few hours to glue everything together, cook it and power it all up. I noticed the FFC connectors were a … Continue reading →

Posted in Mobile Terminal | Comments Off on Version 5 Power Up!

Version 4 or is that 5!

Posted on 29 November 2013 by admin

While I’m looking into writing some of the firmware, and a PC Program to handle all the comms I thought I’d better fix all the hardware bugs I found and get a new version out. Version 4 was just me … Continue reading →

Posted in Mobile Terminal | Comments Off on Version 4 or is that 5!

Mobile Terminal Version 3 Up and (nearly) working

Posted on 20 November 2013 by admin

Getting a solder stencil really paid off as the new board came out of the oven cooked to perfection (well almost!) Prototype powered on with Wi-fi connection made. So whats working? Well the inspection showed a few pins of the … Continue reading →

Posted in Mobile Terminal | Comments Off on Mobile Terminal Version 3 Up and (nearly) working

Boards and stencils from smart prototyping

Posted on 9 November 2013 by admin

Just for info, here are the latest PCB’s that I made at Smart Prototyping. First is the 3rd Version of the Mobile Terminal board, the gold finishing is nice but doesnt really come out on the photo. Below is the … Continue reading →

Posted in Fill-Level Sensor, Mobile Terminal | Tagged | Comments Off on Boards and stencils from smart prototyping

Barcode Scanner Selection

Posted on 11 October 2013 by admin

There are two types of barcode scanner engine, the laser one which oscillates a mirror to produce a line which with good timing and a photo-sensor can be converted into 1’s and 0’s. The second type is a CMOS barcode engine which … Continue reading →

Posted in Mobile Terminal | Tagged | Comments Off on Barcode Scanner Selection

PCB’s and Prototypes

Posted on 2 October 2013 by admin

Version 1.0a schematic and board were completed in September and the PCB Gerber files  sent to Seeed Studios to be made up. These guys did a great job and a swift turnaround on my last project so I was keen … Continue reading →

Posted in Mobile Terminal | Comments Off on PCB’s and Prototypes